Skip to Content
Keller-Heartt has Truegard Propylene Glycol Heat Transfer Fluids in both Inhibited and Food Grade! Order Today!
Propylene Glycol Available. Order Today!
Request a Quote B2B Account Program Government Sales Shipping Policy
Zebra Skimmers: Economy Mixer

Zebra Skimmers: Economy Mixer

by Keller-Heartt
SKU
$269.29 - $269.29
$269.29
$269.29 - $269.29
$269.29

Easily start automatic mixing at your drum by using an economy mixer. Very effective for smaller shops where constant concentrations is required. Economy mixers allow for mixing and delivering metalworking fluids (coolant, cutting fluids). If the viscosity of your coolant is on the thicker side (over 500 SUS), an economy mixer will not work and you’ll need a machinist mixer.

  • 14 metering tips for specific ratios (see below)
  • Maximum viscosity of 500 SUS
  • 4.8 gpm (18 lpm) flow rate
  • 48” intake tube w/check valve included
  • 48” discharge tube included, max length (for longer delivery needs, please refer to the proportioning pump series)
  • Required pressure of 25psi (75psi max)
  • Fits easily on 55 gallon barrels
  • 30 day warranty only
Show More Less

Frequently asked questions

Find answers to common questions about our products and services

  • This mixer is designed for metalworking fluids, including coolants and cutting fluids. It works with fluids up to a maximum viscosity of 500 SUS — if your coolant exceeds that threshold, you will need a machinist mixer instead.

  • A minimum of 25 psi is required to run this mixer, with a maximum allowable pressure of 75 psi. Make sure your water supply falls within that range before connecting.

  • The 14 included metering tips let you dial in specific concentrate-to-water ratios, so you can match the mixer's output to the exact concentration your metalworking fluid requires rather than relying on a one-size-fits-all setting.

  • The included 48" discharge tube is the maximum length for this unit. If your application requires longer fluid delivery, the proportioning pump series is the recommended alternative.

  • Yes, this Economy Mixer is designed to fit easily on 55-gallon barrels, and it includes a 48" intake tube with a check valve to draw concentrate directly from the drum.

  • This Economy Mixer carries a 30-day warranty only, which is shorter than typical industrial equipment warranties — keep that in mind when evaluating it against higher-tier mixer options for heavy or continuous-use environments.

Key Features

  • Mixes and delivers metalworking fluids, including coolant and cutting fluids, directly from your drum for consistent concentrations in smaller shops

  • Includes 14 metering tips to achieve specific mix ratios, accommodating a wide range of metalworking fluid applications

  • Delivers a 4.8 gpm (18 lpm) flow rate with a required operating pressure of 25 psi (75 psi maximum)

  • Comes complete with a 48" intake tube with check valve and a 48" discharge tube included in the package

  • Fits easily on 55-gallon barrels and supports fluids up to 500 SUS viscosity — for higher-viscosity fluids, a machinist mixer is required