Skip to Content
Keller-Heartt has Truegard Propylene Glycol Heat Transfer Fluids in both Inhibited and Food Grade! Order Today!
Propylene Glycol Available. Order Today!

Houghton Safe 620 Hydraulic Fluid - 55 Gallon Drum

SKU 9811389

Original Price $1,676.85 - Original Price $1,676.85
Original Price
$1,676.85
$1,676.85 - $1,676.85
Current Price $1,676.85
Houghton-Safe 620 hydraulic fluid is a premium water glycol type fire resistant hydraulic fluid designed to provide maximum safety for use under pressure, near open flames or in high temperature areas. Due to it's fire resistant properties, Houghton-Safe 620 is the best hydraulic fluid for car washes and forging companies.

Houghton-Safe 620 has been an industry leader since its introduction and continues to be the preeminent fluid in the water glycol market. Houghton-Safe 620 sets performance standards by which other water glycol fluids are measured. Houghton-Safe 620 is Factory Mutual approved as less hazardous fluid.

- 55 Gallon Drums Always In Stock!

- No Freight or Shipping Charges!

- No Long Wait Times!

Features/Benefits:

  • Factory Mutual Approved as fire resistant hydraulic fluid that protects personnel and property from accidental fire and may lower insurance premiums.
  • Low pour point of hydraulic fluid provides excellent stability in cold weather applications
  • High viscosity index allows the fluid to be used at a wide temperature range
  • Houghton-Safe 620 Hydraulic Fluid is recognized worldwide and is available globally.
  • Provides excellent lubrication characteristics which extends pump and component life.
  • Recognized as one of the premium water glycols available on the market and recognized by Original Equipment Manufacturers.
Pump Test:
  • ASTM D-2882 Procedure - Vickers V-104-C pump
Test Conditions:
  • Test Period, hours: 100
  • Discharge Pressure, psi: 2000
  • Fluid Temperature, degrees F: 150
  • Pump Speed, rpm 1200
  • Output Volume, GPM: 7.5
Test Results:
  • Cam Ring Wear, mg 29.4
  • Vane Set (12) Wear, mg: 2.4
Health and Safety:
  • Refer to SDS for proper handling and disposal. Please note that the SDS includes handling, health and disposal information which should be passed on to your employees, and to anyone else who comes in contact with our product. Additional advice can also be obtained from your local Houghton representative. NOTE: Read and understand all precautions on container labels before using this product.
Data (Typical Values)
  • Appearance: Clear red fluid
  • pH: 9.5
  • Viscosity, SUS
  • @0 degrees F: 4218
  • @68 degrees F: 400
  • @100 degrees F: 200
  • @130 degrees F: 116
  • Viscosity Index: 200
  • Pour Point: -50 degrees F
  • Specific Gravity, 60/60 degrees F: 1.08
  • Pounds per Gallon, 60 degrees F: 9.01
  • Flash Point: N/A
  • Fire Point: N/A
Houghton Houghto-Safe 620 Hydraulic Fluid is also available in 5 Gallon Pails.

Frequently asked questions

Find answers to common questions about our products and services
  • This fluid is designed for hydraulic systems operating under pressure near open flames or in high-temperature areas. It is particularly well-suited for car washes and forging operations, where fire resistance is a critical safety requirement.

  • Because Houghton-Safe 620 is a water glycol type fire-resistant hydraulic fluid, it does not exhibit a conventional flash point or fire point the way petroleum-based hydraulic fluids do. This is the characteristic that makes it suitable for environments near open flames or high heat.

  • A viscosity index of 200 means the fluid's thickness changes relatively little across a wide temperature range, allowing it to maintain consistent hydraulic performance in both cold and high-temperature operating conditions.

  • Houghton-Safe 620 has a pour point of -50°F, which provides excellent stability and flow in cold-weather conditions. Its high viscosity index further supports consistent performance across varying temperature environments.

  • Yes, Houghton-Safe 620 is also available in 5-gallon pails for applications that require smaller quantities.

  • The fluid was evaluated using the ASTM D-2882 procedure with a Vickers V-104-C pump, run for 100 hours at 2,000 psi discharge pressure, 150°F fluid temperature, and 1,200 rpm. Test results showed 29.4 mg of cam ring wear and 2.4 mg of vane set wear over the full test period.

Key Features

  • Factory Mutual approved as a fire resistant hydraulic fluid, helping protect personnel and property from accidental fire in high-pressure, high-temperature, and open-flame environments.

  • Water glycol formula carries no flash point or fire point, making it well suited for car wash and forging applications where fire hazard is a concern.

  • Pour point of -50°F delivers excellent stability and reliable performance in cold weather applications.

  • Viscosity index of 200 allows the fluid to perform across a wide operating temperature range, from cold startups to high-heat conditions.

  • Excellent lubrication characteristics extend pump and component life, as demonstrated by low cam ring and vane wear results under ASTM D-2882 testing with a Vickers V-104-C pump.