BVA Hydraulic Combo, 10 Ton, 2" Stroke Hollow Cylinder No Threads with P350 Pump

This SP3-1005B combo set includes all components needed to power, connect, and monitor system pressure. It comes with the P350 2-speed hand pump (with 21.4 cu. in. of usable oil), the HF1005B 10-ton hollow cylinder, a CS3814 6-foot hydraulic hose, a CH38M high flow coupler, a GW2514 liquid gauge, and a CF3814 gauge fitting — no additional components are required to operate the system.

The included HF1005B hollow cylinder has a 0.43" stroke. Verify this against the cylinder's specification sheet before use if your application requires a specific stroke length, as the product title references a 2" stroke that differs from this figure.

The included CS3814 hose is 6 feet long with a 1/4" internal diameter and 3/8" NPTF fittings. The gauge connects via a 1/4" NPTF fitting, and the high flow coupler (CH38M) is a 3/8" unit — so the primary system connections are 3/8" NPTF.

No, the HF1005B hollow cylinder has no threads on either end. It is designed for applications where the cylinder is positioned by contact rather than threaded attachment, so plan your setup accordingly if fixed mounting is required.

The hollow center of the HF1005B cylinder allows a rod, bolt, cable, or other workpiece to pass completely through the cylinder body. This is useful in applications such as post-tensioning, bolt tensioning, or any job where the load must be centered through the cylinder rather than pushed against its face.

The set includes a GW2514 liquid-filled gauge with a 2-1/2" face diameter and a 1/4" NPTF port, along with a CF3814 1/4" NPTF gauge fitting that connects it into the hydraulic circuit. The liquid-filled design helps dampen pressure spikes for easier reading during operation.