PLANTOHYD 40 N NA 55 GALLON DRUM
Environmentally friendly hydraulic and lubricating oils based on natural substances, type HETG, according to ISO 15380, for mobile and stationary hydraulic equipment.
Description
PLANTOHYD N are specialty hydraulic oils based on renewable, natural substances (triglycerides) with active ingredients for the improvement of oxidation and ageing stability. Due to their high level of biodegradability they are offered as an environmentally acceptable alternative to mineral based hydraulic oils in systems operating at low and medium loads. The high polarity of the PLANTOHYD N oils in conjunction with a premium additive system provide excellent lubricating properties. The products fulfill and exceed the minimum requirements according to ISO 15380, type HETG.
Application
PLANTOHYD 32 N or PLANTOHYD 40 N can be used in mobile and stationary hydraulic equipment which require an ISO VG 32 or ISO VG 46 hydraulic oil. When making an oil change to PLANTOHYD N the guidelines for fluid change according to ISO 15380 should be observed. Paints which are not compatible with esters are not recommended. In general, two-component coating systems can be used with ester-based products. The use of stainless-steel tanks and filter housings is recommended as is the use of suitable dryer systems and filtration units. Use ester-resistant compatible seals and plastics in general and the use of Viton FKM in dynamic stressed seals is recommended. The PLANTOHYD N products will show their best performance at tank temperatures between 50 and 60 °C. Recommended temperature range for application: - 27 °C to + 70 °C.
Advantages
- Based on renewable raw materials
- Environmentally acceptable lubricant
- Rapidly biodegradable (≥ 60% according to OECD 301 B)
- Multi-grade characteristics due to high natural, shear stable viscosity index
- Good corrosion protection
- Excellent lubricating properties
- Low evaporation loss
- Natural cleaning properties
- Good low temperature characteristics
